![]() If using direct IP connection on the BDP series (83/93/95/103/105), verbose mode is not supported.įor some reason on these models, the unsolicited status update messages are not generated over the IP socket. If set false, the binding polls the player every 10 seconds. (Optional) If true, the player will send time updates every second. Serial port to use for directly connecting to the Oppo player ![]() ![]() Leave blank if using direct IP connection to the player. Host name or IP address of the Oppo player or serial over IP device.Ĭommunication port for using serial over IP. Specifies what model of player is to be controlled by the binding (required). The thing has the following configuration parameters: Parameter Label There are no overall binding configuration settings that need to be set.Īll settings are through thing configuration parameters. In the Inbox, select Search For Things and then choose the Oppo Blu-ray Player Binding to initiate discovery. Manually initiated Auto-discovery is supported if the player is accessible on the same IP subnet of the openHAB server. There is exactly one supported thing type, which represents the player. You can connect it for example to a Raspberry Pi and use ser2net Linux tool (opens new window) to make the serial connection available on the LAN (serial over IP). You don't need to have your player device directly connected to your openHAB server. The binding supports three different kinds of connections:įor users without a serial port on the server side, you can use a USB to serial adapter. This binding was tested on a BDP-103 only, so there might be issues with other models that will need to be fixed.Īlso review the notes below for some important usage caveats. This binding can be used to control the Oppo UDP-203/205 or BDP-83/93/95/103/105 Blu-ray player.Īlmost all features of the various models of this player line are supported by the binding.
0 Comments
Leave a Reply. |